Carpet Installation

You are currently browsing the articles from Carpet Installation Guide matching the category Carpet Installation.

Carpet Installation Tips For Beginners

Carpet InstallationInstalling a carpet by oneself can be a very fulfilling and rewarding project. But it is important that one collect all of the carpet installation tips that are available before taking on a project of this size. In the DIY rating with zero being very easy and ten being extremely hard, installing carpeting is up there with building a solar panel. This is primarily because there is a real art involved in installing carpet. Professionals who do this all the time make it look very simple, but installing carpet can be a challenge.

Saving time and money installing one’s own carpeting will require attendance at a class or workshop. This is the first of the important carpet installation tips. By attending a meeting led by a professional carpet installer one can learn the many tips and secrets that carpet installers use on a daily basis. One can also learn which areas they can save money on and which must be attended to if the carpet is to have a long life expectancy.

Great carpet installation tips stress that starting small is the only way to learn what unique problems are going to come up in the “big” project. By learning how to use the tools, equipment, and accessories on a small project one will not be so overwhelmed when they tackle the big room. There are some tools that react differently to left handed people than right handed people. Some of the equipment requires a bionic knee to operate properly and in a small room a person can figure out how to make that work without the surgery.

Installing carpet is a lot like working with wood. Measure, measure, then measure again. There is no room for error with carpeting. Cutting a piece too short can mean creating a void in an important area of a room. Having a list that contains all of the items that will be needed to install carpet will allow an individual to collect them all at once from a single source. Most expensive equipment that will be needed can be leased and some of the tools can be borrowed. By resisting the urge to purchase a tool that will only be used once an individual can save a tremendous amount of money when installing their own carpet.

Purchasing carpet tack strips that fit the requirements of the carpet is very important. Most carpets wear poorly and do not last as long as they should because they have been installed using improper carpet tack strips. These strips are basically the only thing holding the expanse of carpet laid in place. If they are too small the tacks will bend and release the carpet. If they are too large the tacks will tear the carpet and it will rip away from the strip.

No matter how careful a person is, it is likely that the carpet that is being installed will fray and begin to unravel at some point. Latex seam binding is not an expensive product but saves time and money when it is applied to all of the edges of a carpet as soon as it is unrolled. Carpet installation tips for DIY’ers include applying latex seam binding to every edge of the carpet.

Carpet may be installed on tile, wood, or linoleum for many reasons. An important tip is to be sure to lay cement board underlayment on the surface prior to putting down the padding for the carpet. Cement board underlayment provides the protection to the pad that is needed to prolong the life of a carpet. It makes walking on the carpet more comfortable and the carpet pad will not wear unevenly.

Among the many carpet installation tips one will receive from a professional will be that it is important to call a professional when a person feels they are in over their head. Carpeting, padding, underlayment, etc., is expensive. If a project becomes overwhelming or is taking way longer than expected, sometimes the best cost savings can be found in hiring a professional to finish the job.

Written by admin on October 10th, 2009 with no comments.
Read more articles on Carpet Installation and Do It Yourself Carpet Installation.

Learn How To Install Carpet Yourself

Install CarpetIf you want to change the look of your room, flooring can be a wonderful way to make a major change. Wall to wall carpeting can add luxury and functionality to a room but it needs to be installed properly. Learning how to install carpet is not hard, but there are a few steps that you need to take in order to make sure that your carpet installation is a lasting success.

The first thing you need to do is make sure that your flooring is prepared. Carpeting needs a hard sub-floor to be installed on. Carpeting can be installed over most types of subflooring. Make sure your subflooring will keep moisture from coming into contact with the carpet. This can be especially important if you are installing carpet in a basement. Subflooring for carpeting needs to be something that can easily have the underlay stapled to it.

The next step is to get your installation equipment together. In order to install wall to wall carpeting you will need tackless strips, a carpet knife for trimming and cutting the carpet to size, a chalk line to mark where to cut the carpeting, a power stretcher to ensure that the carpet is laid tightly and firmly and cutting tools such as a seam cutter and wall trimmer. You will also need a stair tool. Seam tape and a seam iron will help you join pieces of carpet together invisibly, which is the mark of a truly expert carpet installation.

Your first step, after getting your subfloor is in place is to remove any debris or objects which might be painful or uncomfortable to step on. Tacks and nails have a way of working their way up through carpeting so make sure that everything is smooth and clean under the carpeting. After you have done this, put the tackless strips at the edges of the room and lay the underlay. You need to position them about a half inch from the walls and lay them so that the tacks face the walls. The only areas that will not have tackless strips placed in them are doorways.

You should lay the underlay in strips. Make sure you have trimmed the excess. The underlay should be butted up against itself at the edges but you need to make sure it is not overlapping or bunched up. A trimming tool can come in handy to make sure that the fit is nice and tight. Make sure that the underlay is not covering the tackless strips. Use a stapler to attach the underlay to the subflooring.

Once the underlay is positioned and secured, you can begin to measure and lay your carpet. The first measurement you should take is the longest part of your room. Measure twice cut once applies to working with carpeting as well as with wood. You need to make sure that when you are measuring the longest point in your room, you add at least four inches to that measurement.

Marking the carpet is critical. Mark your room measurement (with the added length) on the back of the carpet. You will use your chalk line at this point to lay out the cut lines that you will make. After your carpeting has been marked, you will then cut it with the carpet knife. Cutting the carpeting from the back will make it easier for you to follow the cut lines. Keep in mind that the backing on the carpet can be quite tough and durable, so make sure your knife is sharp. At this point you want to bring the carpet into the room and do a test fit in order to make sure that you have cut properly.

If your room is large, you will need to make sure that you cut a second piece of carpet according to the same measurements. Make sure you pay attention to any patterns and repeats. Overlap the pieces of carpet, then cut through both layers with the seam cutter so your edges line up perfectly. Join the two with a piece of seaming tape placed underneath. A seam iron is used at this point to activate the adhesive in the tape and cause the pieces to stick together.

You will use the knee kicker to attach the carpet to the tackless strips. Use your knee on the kicker to firmly press the carpet onto the tackless strips. The edge trimmer will be used at this point to trim the carpet at the wall. The other side of the carpeting should be attached to the tackless strips. Use the power stretcher to bring the carpet over on top of the tackless strip and attach it.

All that is left at this point in your carpet install is to use the edge trimmer to trim around the wall, cut any vents in the floor to accommodate heating, and install door edging in doorways to finish the look. A stair tool can be used at this point to tuck and install carpet under any baseboards.

After you install carpet and those steps are complete you can sit back and enjoy your new wall to wall carpeting and feel that you have accomplished something by installing it yourself.

Written by admin on October 5th, 2009 with no comments.
Read more articles on Carpet Installation and Do It Yourself Carpet Installation.

Picking Carpet and Installation Made Simple

It is not enough to find a suitable carpet; you must also consider proper carpet installation. Shopping for a carpet can be intimidating because there are various factors to take into account. It is no use getting the best carpet money can buy if you don’t get it installed properly.

But there is no need to panic. There are guidelines that you may follow in order to get everything running smoothly. Instead of sweating bullets over the search for that perfect carpet, you may relax and enjoy your shopping. However, you must keep in mind that you should never rush into buying a carpet. It is one of those acquisitions that should be given a lot of thought before actually buying. After all, you’ll have to live with it for years.

Color is an important factor to consider. Take a good look at the room for which you are acquiring the carpet. Try to figure out which color may best suit your decor. If you already have carpet in that room, ask yourself if you like the color and the way it harmonizes with the rest of the room. Sometimes you may have the right color except not in the right shade. If this is the case, try a lighter or darker shade of your actual carpet color.

As established earlier, color is indeed important. If you don’t get the right color, you might as well have stayed with your old carpet, or without carpet altogether. You must make sure the carpet will blend well particularly with the walls and curtains, unless you decide to change the curtains as well. Of course this is contingent upon the look you want to give your room.

Next to color comes texture. Of course, your choice of materials will be determined by the style of your decoration. Carpet textures vary tremendously. You could have a very soft carpet or a very harsh one and everything in between. Again, it depends on what kind of atmosphere you want your room to have.

In third place comes size. Perhaps you really need a wall to wall carpet installation if you floors are ugly and you want to conceal them. On the other hand maybe you have some lovely wooden planks underneath your carpet and you want to show them off. If this is the case, you will need a smaller sized carpet.

One more determining factor when picking a carpet is its eventual use. It is one thing if your room is to be rarely used and a completely different picture if it is to be constantly filled with children and pets. In this case, durability and easy maintenance is very important. It is convenient that you get yourself a more durable type of material for rooms with a greater amount of activity.

In conclusion, follow your initial checklist, point by point, so you will buy the most appropriate carpet for your room. Don’t play it by ear. You could end up regretting your choice. Now that you are sure of what you want, do make certain your carpet is installed by professionals.

Written by admin on July 30th, 2009 with no comments.
Read more articles on Carpet Installation.

« Older articles

No newer articles