Do It Yourself Carpet Installation

You are currently browsing the articles from Carpet Installation Guide matching the category Do It Yourself Carpet Installation.

Carpet Installation Tips For Beginners

Carpet InstallationInstalling a carpet by oneself can be a very fulfilling and rewarding project. But it is important that one collect all of the carpet installation tips that are available before taking on a project of this size. In the DIY rating with zero being very easy and ten being extremely hard, installing carpeting is up there with building a solar panel. This is primarily because there is a real art involved in installing carpet. Professionals who do this all the time make it look very simple, but installing carpet can be a challenge.

Saving time and money installing one’s own carpeting will require attendance at a class or workshop. This is the first of the important carpet installation tips. By attending a meeting led by a professional carpet installer one can learn the many tips and secrets that carpet installers use on a daily basis. One can also learn which areas they can save money on and which must be attended to if the carpet is to have a long life expectancy.

Great carpet installation tips stress that starting small is the only way to learn what unique problems are going to come up in the “big” project. By learning how to use the tools, equipment, and accessories on a small project one will not be so overwhelmed when they tackle the big room. There are some tools that react differently to left handed people than right handed people. Some of the equipment requires a bionic knee to operate properly and in a small room a person can figure out how to make that work without the surgery.

Installing carpet is a lot like working with wood. Measure, measure, then measure again. There is no room for error with carpeting. Cutting a piece too short can mean creating a void in an important area of a room. Having a list that contains all of the items that will be needed to install carpet will allow an individual to collect them all at once from a single source. Most expensive equipment that will be needed can be leased and some of the tools can be borrowed. By resisting the urge to purchase a tool that will only be used once an individual can save a tremendous amount of money when installing their own carpet.

Purchasing carpet tack strips that fit the requirements of the carpet is very important. Most carpets wear poorly and do not last as long as they should because they have been installed using improper carpet tack strips. These strips are basically the only thing holding the expanse of carpet laid in place. If they are too small the tacks will bend and release the carpet. If they are too large the tacks will tear the carpet and it will rip away from the strip.

No matter how careful a person is, it is likely that the carpet that is being installed will fray and begin to unravel at some point. Latex seam binding is not an expensive product but saves time and money when it is applied to all of the edges of a carpet as soon as it is unrolled. Carpet installation tips for DIY’ers include applying latex seam binding to every edge of the carpet.

Carpet may be installed on tile, wood, or linoleum for many reasons. An important tip is to be sure to lay cement board underlayment on the surface prior to putting down the padding for the carpet. Cement board underlayment provides the protection to the pad that is needed to prolong the life of a carpet. It makes walking on the carpet more comfortable and the carpet pad will not wear unevenly.

Among the many carpet installation tips one will receive from a professional will be that it is important to call a professional when a person feels they are in over their head. Carpeting, padding, underlayment, etc., is expensive. If a project becomes overwhelming or is taking way longer than expected, sometimes the best cost savings can be found in hiring a professional to finish the job.

Written by admin on October 10th, 2009 with no comments.
Read more articles on Carpet Installation and Do It Yourself Carpet Installation.

Learn How To Install Carpet Yourself

Install CarpetIf you want to change the look of your room, flooring can be a wonderful way to make a major change. Wall to wall carpeting can add luxury and functionality to a room but it needs to be installed properly. Learning how to install carpet is not hard, but there are a few steps that you need to take in order to make sure that your carpet installation is a lasting success.

The first thing you need to do is make sure that your flooring is prepared. Carpeting needs a hard sub-floor to be installed on. Carpeting can be installed over most types of subflooring. Make sure your subflooring will keep moisture from coming into contact with the carpet. This can be especially important if you are installing carpet in a basement. Subflooring for carpeting needs to be something that can easily have the underlay stapled to it.

The next step is to get your installation equipment together. In order to install wall to wall carpeting you will need tackless strips, a carpet knife for trimming and cutting the carpet to size, a chalk line to mark where to cut the carpeting, a power stretcher to ensure that the carpet is laid tightly and firmly and cutting tools such as a seam cutter and wall trimmer. You will also need a stair tool. Seam tape and a seam iron will help you join pieces of carpet together invisibly, which is the mark of a truly expert carpet installation.

Your first step, after getting your subfloor is in place is to remove any debris or objects which might be painful or uncomfortable to step on. Tacks and nails have a way of working their way up through carpeting so make sure that everything is smooth and clean under the carpeting. After you have done this, put the tackless strips at the edges of the room and lay the underlay. You need to position them about a half inch from the walls and lay them so that the tacks face the walls. The only areas that will not have tackless strips placed in them are doorways.

You should lay the underlay in strips. Make sure you have trimmed the excess. The underlay should be butted up against itself at the edges but you need to make sure it is not overlapping or bunched up. A trimming tool can come in handy to make sure that the fit is nice and tight. Make sure that the underlay is not covering the tackless strips. Use a stapler to attach the underlay to the subflooring.

Once the underlay is positioned and secured, you can begin to measure and lay your carpet. The first measurement you should take is the longest part of your room. Measure twice cut once applies to working with carpeting as well as with wood. You need to make sure that when you are measuring the longest point in your room, you add at least four inches to that measurement.

Marking the carpet is critical. Mark your room measurement (with the added length) on the back of the carpet. You will use your chalk line at this point to lay out the cut lines that you will make. After your carpeting has been marked, you will then cut it with the carpet knife. Cutting the carpeting from the back will make it easier for you to follow the cut lines. Keep in mind that the backing on the carpet can be quite tough and durable, so make sure your knife is sharp. At this point you want to bring the carpet into the room and do a test fit in order to make sure that you have cut properly.

If your room is large, you will need to make sure that you cut a second piece of carpet according to the same measurements. Make sure you pay attention to any patterns and repeats. Overlap the pieces of carpet, then cut through both layers with the seam cutter so your edges line up perfectly. Join the two with a piece of seaming tape placed underneath. A seam iron is used at this point to activate the adhesive in the tape and cause the pieces to stick together.

You will use the knee kicker to attach the carpet to the tackless strips. Use your knee on the kicker to firmly press the carpet onto the tackless strips. The edge trimmer will be used at this point to trim the carpet at the wall. The other side of the carpeting should be attached to the tackless strips. Use the power stretcher to bring the carpet over on top of the tackless strip and attach it.

All that is left at this point in your carpet install is to use the edge trimmer to trim around the wall, cut any vents in the floor to accommodate heating, and install door edging in doorways to finish the look. A stair tool can be used at this point to tuck and install carpet under any baseboards.

After you install carpet and those steps are complete you can sit back and enjoy your new wall to wall carpeting and feel that you have accomplished something by installing it yourself.

Written by admin on October 5th, 2009 with no comments.
Read more articles on Carpet Installation and Do It Yourself Carpet Installation.


Do It Yourself Carpet Installation

Do you have a room in your house that requires carpet installation and you want to do it yourself? Do you know how to do it and have the tools required to make the installation easy and look like it’s been done by a professional? Here are some hints and tips to get the job done quickly and easily.

When you have decided that you are going to lay the carpet yourself, one of the first things to do is some RESEARCH. Find as much information that you can from the internet through articles or tutorials, or take part in a carpet installation workshop at your local home improvement store. Once you are confident that you will be able to lay the carpet yourself, take accurate measurements of the room that you will be carpeting. Figure out a budget, then use that budget to purchase the carpet and padding you would like, along with what tools that are necessary to lay the carpet.

Tools that you will require for the installation include safety glasses, knee pads, a hammer, measuring tape, gloves, a seam roller, knee kicker, seam cutter, and seam tape. You do not need to purchase all of these items, you may already have some from another job around the home, such as the hammer or safety gloves. You will have to buy a seam roller or knee kicker if you are only doing one room or carpet.

You will then want to remove the old carpet, try and do this with minimal mess, it may seem like a time waster, but vacuum the old carpet first, this will minimize the amount of dust thrown about when you start to pull up the old carpet. Cut the carpet into around 3 or 4 foot wide strips, then start pulling up the carpet, roll the carpet as you are pulling it up to make disposal easier. You then need to pull up the old padding; it is not worth replacing the carpet if you are not going to also replace the padding. Once all old carpet and padding is removed give the floor another good vacuum, you want to ensure that there is NO dust or debris left on the floor.

Install new tackles strips and make sure they are secured and installed correctly, make sure they are butted up against each other in corners and not placed across doorways. Then lay the underlay down and staple into place.

Now you are ready to lay the carpet, this is the part that you need to do correctly. Lay the carpet out with around 6 inches overlapping the edge of the floor that can be trimmed off, so that the carpet fits the floor right. Mark the underside of the carpet with chalk where the carpet overlaps the floor, fold the carpet on itself and carefully cut the excess off to ensure you do not cut the underlay.

Next you will need to use the knee kicker to stretch the carpet over the tackles strips so the carpet is held in place, you will need to do this over the entire room and when finished trim the edges of the carpet carefully with an edge trimmer.

Finally, all that’s left to do is tuck the carpet in any gaps or around door edging and tack strips, trim the carpet around doors, and install edging on the door strip. Upon completion you’ll trim around any vent openings and install the molding, then sit back and enjoy your new carpet that you’ve installed on yourself.

Written by admin on July 2nd, 2009 with no comments.
Read more articles on Do It Yourself Carpet Installation.